Munchkin Any Angle Click Lock Weighted Straw Cup

This review is on the Munchkin Any Angle Click Lock Weighted Straw Cup. This cup is advertised as a spill proof cup that your child can drink from any angle.

The Good, the straw is super soft and super tough. Once my son had all his teeth he was able to bite through but while he was teething and starting out the straw was very durable. The cup doesn't spill when dropped and is just very durable overall. It also comes with a cap that pinches the straw shut and prevents leakage. Your child really can drink from this at any angle as the weighted straw drops to wherever the fluid in the cup is. The cup is pretty inexpensive as you can get it on Amazon for about $7 each (Link here: "Any Angle Cup") so when you lose one it is not to terrible to replace. Cup is also very dishwasher safe, no issues in the dishwasher at all.

The Bad, The straw is hard to clean. The cup comes with a cleaning brush which works well but it easily catches on the edges where the weighted section meets the straw. The worst part of the cup is that when the cup is 1/2 full or more as the temperature changes the pressure builds up in the cup and it does leak out of the straw. If you leave the cup on the table for a period of time, even just as short as sitting it down to give you child a bath it will start to leak out and it will be sitting in a pool.

All in all, the cup is a decent buy, so long as you don't plan to have the cup sitting for a while and understand that it will take some effort to clean the straw, especially if you leave the cup sitting with the fluid in it.

Buy on Amazon Here : "LINK"

Comments

TP-Link EAP110-Outdoor V3 Review

Short review for today, I needed to extend my wireless coverage to the back yard. My son likes to listen to music when we are playing outside and lets just say his music tastes are not on my vast library of stuff I was able to get on Napster. So we use youtube and spotify to play songs and a few data overages later I decided we needed an upgrade. I didn't need anything super fast just, 300Mbps speed is plenty fine but I did want to have coverage over the entire back yard. I also wanted a POE solution so I just had to worry about burring one cable and the low voltage makes it safer as well since I ended up mounting it on his playhouse. Installation was a snap, a few screws into the mounting plate and plug in the CAT6 cable and it was installed. Once I verified I had power I logged into the Omada APP and was able to find and setup the WAP in a few minutes. Right now about 15% of the total network band width is using this access poin...

Benefits of playing with traditional toys

Benefits of playing with traditional toys With the increase in the production of new technologies and availability of mobile phones and gadgets to children, the creative abilities of today’s children are affected to a dangerous level which is a big concern for parents now a days. So traditional toys come in handy in such situations. Playing with toys has a tremendous impact on many elements of a child's life, in addition to exposing them to social interactions. Children are always eager to discover and learn new things. They are always curious about the world around them, and their active exploration of nature is a necessary aspect of growing up. Parents can help in their children's development and understanding of their surroundings by buying toys for them. Traditional toys are a more unique and helpful instead of the gadgets on which they play games and watch videos all day. Traditional toys are not only charming and entertaining, but they also tend to survive l...

Fulament Fula-Flex 2.0 Magnetic Spring Steel Smooth PEI Flex Bed

Hi everyone! So I recently have been looking for a way to get my prints off the printer in a cleaner way. I have been traying the typical hair spray / glue stick on the glass bed and that has done me well so far but I was really looking for something a bit easier to use. I recently came across a flexible bed made by Fulament. Now I have seen these flexible beds before but they always seemed to be cheap thin little parts that I was worried would never stay flat. This bed is however is great, for just $50 (a bit more if you want the textured version) is very thick. On top of that the magnet comes with a very sticky adhesive 3M backing and stuck solid to the aluminum platform. Installation process was simple 1. Take off the glass 2. Clean the surface with the supplied alcohol pads 3. Attached the magnet and snap on the plate. 4. re-level the print bed That's it! Print performance has been great, I have done a dozen prints or so and they come of clean and I don't have to wash off ...

Jay Rates Everything

Search This Blog